The perfect winter cover for your 2016 Coachmen Clipper Classic Pop-Up Camper is the Classic Accessories Deluxe PolyPro III Heavy-Duty Pop-Up Camper Cover # CA80041.
This cover is designed to fit folding campers that are 14' to 16' long and the AC is figured into the size you need. It uses a triple-ply fabric that is made to keep out moisture so whether your winters have just some rain or you are inundated with snow this cover will protect your Coachmen. view full answer...
For your 2013 Coachman Clipper I recommend the Dexter Nev-R-Adjust Electric Trailer Brake Kit - 10" - Left and Right Hand Assemblies - 3.5K # 23-468-469. These self-adjusting assemblies require no maintenance adjustment like your factory brake assemblies did.
If you prefer the original style, then you will use the Dexter Electric Trailer Brake Kit - 10" - Left and Right Hand Assemblies - 3,500 lbs # 23-26-27. Individually this is # 23-27 and # 23-26 as for some reason their pricing... view full answer...
The bike rack with the highest weight capacity and rated for a Camper like your 2019 Coachmen Clipper Classic Camper is the Swagman E-Spec Bike Rack for 2 Electric Bikes # S94FR which can accommodate two bikes weighing up to 70lbs each.
Your best bet is to remove the batteries and any accessories and see if you can get the bikes down to 70lbs each.
I included a video of the Swagman # S94FR for you to take a look at. view full answer...
The Lippert 10" Brake Hub and Drum assembly 814200 you mentioned would work just fine on a 3500lb axle as it uses the common 3500lb bearing combination of # L68149 and # L44649 but we do not carry that hub.
Instead I recommend the Dexter Trailer Hub and Drum Assembly for 3,500-lb E-Z Lube Axles - 10" Diameter - 5 on 4-1/2 # 84546UC3-EZ you mentioned as it has the same bearing combination, and will fit perfectly on your 3500lb axle.
I included a video of the # 84546UC3-EZ for you to take... view full answer...
Certainly nothing that is any type of custom fit but you might be able to use something that mounts to tracks such as the Rhino-Rack RT-Style Roof Rack Tracks - Rivet Mount - 66" Long # RRRTV168.
Then you'd need the right crossbar length to go with Legs # RRRLT600H.
I'm not sure what your roof measures so I've added a link below to our selection of tracks and you can filter through them by size. view full answer...
Generally speaking, you can simply replace the incandescent tail light assemblies with LED tail light assemblies without any additional wiring. Almost all aftermarket tail light wiring and most factory harnesses accept both incandescent and LED so you don't have to worry about adding resistors. For a set of LED trailer tail lights, I recommend the Optronics LED Combination Trailer Tail Lights part # TLL160RK but I have attached our entire selection below if you have a different style. view full answer...
The best way to install the MaxxFan Deluxe Roof Vent w/ 12V Fan and Thermostat # MA00-05100K that you referenced is to use the included screws and sealant to attach it to your pop up. Sealant alone would not be enough and we don't have a clamp on kit. For sealant then you'd want the part # 0160297. view full answer...
Go To Results